Ohraňovacími lisy – Hydr. pressbrake FARINA PFO 130/30

umístění

výrobce

popis

pressure 130 t
chamfer lenght 3150 mm
distance between columns 2600 mm
engine output 15 kW
control CYBELEC VisiTouch
weight of the machine ca. 10900 kg
dimensions of the machine ca. 3990x1750x2900 mm
Domestic equipments:
- DELEM DA66T - 2D CNC control with LCD color display for control
of 7 axes:
Y1 = 1 ? cylinder
Y2 = 2 ? cylinder
X1 = horizontal movement of the backgauge
X3 = horizontal movement of the stop finger / inclination
R = vertical movement of the backgauge
Z1-Z2 = lateral movement of the stop fingers
- Top Dead Center
- Speed ??changeover point
- bending end
- Deactivation point of the safety light barrier
- Retreat stop
- CNC controlled proportional pressure control
- conical bending
- USB port
- DFC stator suspension compensation
- Motorized back gauge model "AS" with 5 controlled axes
- X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
- R-axis: 250 mm stroke
- Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
- Manual Unterwerkzeugklemmung, make Wila
- Incl. Tools: sectioned, hardened and ground:
Upper tool: Type: Wila BIU-021
Lower tool: Type: 4-V
- Hydraulic compensation
- "Platinum Package" consisting of:
Active dynamic crowning
Compensation of the stator suspension
Sheet thickness measuring system
diagnostic module
- Active dynamic crowning device:
Constant angle over the entire length
Complete management of the crowning
fully automatic
Constant angle on the sides and in the middle
No speed reduction
The system works automatically and is almost invisible,
no additional equipment required
- Compensation of the stator suspension
Bending sheet metal plates of different lengths without that
The program parameters need to be changed.
Bending of notched or perforated sheets without
The program parameters need to be changed.
Possibility of parts to work with reduced dimensions
then test the workpiece with the actual dimensions
without having to change the program parameters.
No speed reduction during processing.
The system works automatically and is almost invisible, no accessories
required.
- Sheet thickness measuring system
Increased accuracy
Fully automatic system
Less waste
Control of the material
No speed reduction
The system works automatically and is almost invisible, no accessories
required
- Soft start system "Start / Stop" to save energy
- Control cabinet cooling
- Hydraulic parts from Hoerbiger and Denison
- Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
Siemens, Delem
- Cabinet lighting through a LED strip
- Machine lighting behind the machine with 2 LED strips
- Footswitch
- Laser safety system "DSP AP MSC" with height-adjustable
Special arms. The system allows a speed change of only 2 mm
from sheet metal and optimizes cycle times and maximum safety.
- 2 front support arms (500mm): laterally movable and manually
height adjustable by handwheel.
- side and rear safety devices
- Service key
- Operating instructions and maintenance manual
- Machine without oil
- Machine according to standard 2006 / 42 / CE and CE certificate
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stav

rok výstavby

Stroj pod proudem