použité stroje: Sheet- and Coil-processing lines

Details
material width:75 mm
total power requirement:1,5 kW
dimensions of the machine ca.:1,90 x 1,15 x 1,25 m

Details
material width:300 mm
no. of straightening rolls:13+2+2
straightening roll diameter:60 mm

Details
material width:120 mm
material thickness:0,3 - 2,0 mm
no. of straightening rolls:19
roll diameter:18 mm
speed:0 - 60 m/min
150 kg
band width:120 ...

Details
material width:260 mm
total power requirement:4,5 kW
dimensions of the machine ca.:1,15 x 2,90 x 1,80 m

Laser power: 2kW, table dimensions: 1500x3000mm, connected load: 110kVA, length: 8000mm, width: 5500mm, height: 3000mm, including cooling aggregate, extraction and air filtration unit.

Laser power: 3kW, table dimensions: 1500x3000mm, connected load: 130kVA, length: 11,000mm, width: 6000mm, height: 3000mm, including cooling aggregate, extraction and air filtration unit.

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Ref.Nr.: INNO20956

Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.

Ref.Nr.: INNO20803

Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.

Ref.Nr.: INNO20631

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Ref.Nr.: INNO20562

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Ref.Nr.: INNO20561

Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t.

Ref.Nr.: INNO20560

Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools.

Ref.Nr.: INNO20341

LQA1250PLC - PLC - controlled combined strip and cross-cut shears of excellent quality for steel sheets up to 1.2 mm thick / ST42. maximum sheet metal strip width 1,250 mm, maximum throughput feed ...

WVR200 - combined electronically controlled roll feed straightening machine with SIEMENS® PLC control - optionally with a decoiler integrated in the PLC, largest sheet width 200 mm (optionally 250 mm ...

EW200 / 3PLC - very high-quality roller feed for strip material up to 200 mm wide and 3 mm sheet thickness / ST42, PLC - control from SIEMENS - feed drive motor from SIEMENS, diameter of the feed ...

Working length: 3050mm, sheet thickness: 10mm.

Ref.Nr.: INNO19853

There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.

Ref.Nr.: INNO19824

Including documentation, tools, lubricants and roller tables.

Ref.Nr.: INNO20138

Max. sheet thickness: 120mm, length: 2940mm, width: 3660mm, height: 2670mm.

Ref.Nr.: INNO20017

X-travel: 500mm, y-travel: 275mm, z-travel: 300mm, max. feed rate: 15m/min, max. laser power: 700W, clamping stroke: 4mm, control: HEIDENHAIN TNC 407.

Ref.Nr.: INNO19966

Folding width: 10-13mm, max. pipe length: 3000mm, machine was scarcely used.

Ref.Nr.: INNO19514

Working width: 1030mm.

Ref.Nr.: INNO19512

Pipe diameter: 219mm, nominal width: 3600mm, including preheating oven, Blasting System GIETART GW 1530-425, centrifuge, coating center, drying tunnel, chain conveyor and color filter, operational ...

Double unwinding reel
Load-2 x 1500 kg
Bandwidth 350 mm
Coilausal diameter-up to 1600 mm
Coile inside diameter-360-530 mm
Manualle hydraul. Spread
Pneumat. Pressure ...

Pass width 630 mm
Max. Workpiece cross-section at 40 kg/mm2 tensile strength 4 x 630 mm
Material thickness-0.3-6 mm
Number of straightening rollers 23 pcs, diameter 30 mm

Bottle formats: 0.125/ 0.2/ 0.5/ 0.75l, bottle shape: various, operational hours: ca. 35,000h.

Ref.Nr.: INNO18345

Voltage: 380/ 220V.

Ref.Nr.: INNO19394

Punching force: 500kN, swing: 610mm, stroke: 0-60mm, punching diameter: 30mm, including various tools and roller conveyor.

Ref.Nr.: INNO17191

There are two Knife Shears SCHMITZ available, workpiece dimensions machine 1/ 2: 650x1.5/ 520x1.5mm, including tools and spare drive.

Ref.Nr.: INNO19366

Product dimensions: 609.7x306.2x71mm, output: 1 piece/min, space requirement: 8x14m², controls: SIEMENS, with 12 workstations and 16 workpiece carrier.

Ref.Nr.: INNO11507

Blade length: 3100mm, cutting length: 3050mm, cutting performance: 450-700N/mm², throat depth: 100mm, back gauge: 1000mm, stroke speed: 26-56/min, controls: DAC 350, power: 22kW, length: 3500mm, ...

Blade length: 3100mm, cutting length: 3050mm, cutting performance: 450-700N/mm², throat depth: 100mm, back gauge: 1000mm, stroke speed: 26-56/min, controls: DAC 350, power: 22kW, length: 3500mm, ...

Max. punching force: 250kN, working range: 2000x1000mm, C-axis: 360°, max. sheet thickness: 6.4mm, max. punching diameter: 76.2mm, max. table load: 100kg, weight: 8t.

Ref.Nr.: INNO17674

1.5-10x2000 mm SLITTING LINE r
r
BARBERO, year 1997, but continuelly upgradedr
r
30 tons,r
r
speed 150/200 meters, SIEMENS S5 r
r
LIST OF ...

used cut to lenght line SACMA 1550 X 0,8mm/3,5 mm r
20 ton r
start ad stop r
Still

Trapezoidal CTL line r
used profiler for trapezoidal for roof product

USED COILS cut to lenght LINE FOR TRAPEZOIDAL SHEET

used coils Cut to lenght line 1050 X 0 ,4/3 mm r
with fly shear, striagthner for 19 rollsr
12 ton coils

used slitter line RIZZATO 1600 mm X 0,4/3 mm
30 tons capacity

used coils cut to lenght line 1550 X 1,5/5 mm

used multiblankets coils ctl line 1850 X 3mm

Cut-to -length line installation for steel and/or aluminium strips
Cutting of plates rectangular or trapezoidal
Thickness range in steps of 0.15 ... 25.4 mm
Width up to 2500 mm

For strips of steel or aluminium
Aluminium and steel can be processed with removable cassette
Thickness range in steps of 0.15 ... 25.4 mm
Width up to 2600 mm
other values ...